Alteration of the music center under usb

Most likely, many people still have old players, recorders or other music playback systems at home. It’s a pity to throw them away, but leaving them at home is pointless. No need to worry, as there is an opportunity to give a second life to these "old men". Remaking an old audio system into a USB connector is a very simple task, especially if it relates to a music center. This work does not take a lot of time, and at a cost completely affordable.

What materials and tools will be required

Rearranging various parts from audio systems is laborious and requires some experience. Naturally, you can adapt several old and unnecessary devices to the assembly, but it will take quite a while. It is much easier to use a ready-made purchased module.

Since modern technical innovations are constantly being updated, Chinese manufacturers have pleased radio amateurs. Today, special audio modules are manufactured that can convert sound. Features of the modules:

1. The simplest devices that are equipped with only a usb port.
2. Heaped up devices that have a display to display information.
3. A certain number of ports for different needs.
4. The remote control with which the equipment is controlled.

However, only the above details are not enough even for the assembly of a simple audio system. For which you will need to use the old music center. Well, if this audio system is still in working condition. If the equipment is broken, then there is nothing scary. The most important thing is that the following items are operational:

1. A sound amplifier that is integrated into the audio system.
2. Speakers from the old center, it is with the help of them that you can listen to music.
3. The battery cell, or the cell that is responsible for the battery charge.

Reference! You can purchase a module with various "twists", but to revive the old cassette recorder, a normal device that is equipped only with a usb connector and can output high-quality sound is quite enough.

Important points before work

The connection schemes for the audio module and the music center are usually bundled with purchased devices, otherwise they can be easily found on the Internet. Modular equipment must have a constant voltage of 5 volts. From 12 V, the module must be connected using a power supply (12/5 Volts). All work on the alteration of the audio system must be done, be sure to observe safety precautions.

These home-made music players can be made as portable devices: it is much easier to carry a small music player around the apartment than a stationary audio system. From an old cassette recorder, you can assemble a small music player with a usb port.

Alteration of the music center under usb: step by step

In order to mount the sound module into the audio player, the music center will require a little disassembly. This is required to indicate the location where the device will be located.

At the same time, do not forget that the installation must be done so that you can use the equipment from the remote control.

If you have some experience with electronics, then you can solder the audio module to the wires. If the electronics aren’t your hobby, you can mount the device in a cassette unit.

When the location for the installation has been determined, you can proceed to connect the sound module to the old audio system. The main stages of the work are as follows:

1. Taking a piece of wire, you need to connect the power and sound output. Why do you need an audio module circuit and a music player.
2. Work must be done very carefully, as the wires are powered by electricity.
3. After completing the wiring, you can return to the installation of the board.
4. If the connector for the cassettes is rejected, and it was decided to mount the audio module in another place, then make a hole for usb.
5. Then you just need to connect the output of the module with the sound output board on the center. Why you can use several methods. The first is to solder to the circuit, the second is to connect using the aux input, if one is present.
6. We connect the power and check the performance of the equipment.

Reference! You do not need to expect a lot from this audio system, since its potential is limited by the capabilities of the installed sound card. But to listen to your favorite musical compositions, an animated tape recorder is quite suitable.

To make a usb connector for a flash drive in an old player, you do not need to make significant effort. You just need to purchase a special sound module and insert it into the old player. For a low cost, you can get equipment that will play music tracks from a flash drive.