How to clean the microphone on the phone without ruining it?

Sometimes you can notice that a particular device begins its malfunctioning activity. This situation can be explained by various reasons. However, the most common is pollution, which is formed through the long-term operation of the equipment. In this same article, we will consider options for eliminating it, as well as find out some recommendations that might help users interact.

Can I clean my microphone with liquids?

In this question, it is important to remember that with a positive answer, not all solutions are meant. Thus, it is possible to use exclusively either hydrogen peroxide or alcohol. Moreover, when applying it is most important to wait for the complete evaporation and only after that proceed with further actions. It is also worth considering that both the first option and the second can be exploited with application to a soft product. In its quality, both a cotton pad and a stick can act.

How to clean the microphone in the phone?

Beforehand, it is very important to understand: what kind of cleaning the device needs. Indeed, it is possible to carry out actions by various methods, each of which will differ in its original purpose. Thus, it is worthwhile to understand that with the following situations, various care options are used:

With the accumulation of small particles, dust, blockage;
With high humidity.

In the first case under consideration, one can also use a single outcome of events:

For the first method, you need any thin object. Its quality can be either a needle or a toothpick.
Thus, the product you have chosen should be carefully and slowly lowered directly into the hole designed for the microphone.

ATTENTION! At this stage, it is very important to carry out each action with great care in order to avoid various internal injuries.

With the help of a small part, it is worth trying to remove the accumulated dirt or at least push it through.
In conclusion, it is recommended to recheck the serviceability. In case of unsatisfactory results, it is desirable to repeat the above manipulations.
If you have a special facility, which is a small vacuum cleaner, then it will be very useful in the assigned business.

The following method requires an analysis of the immediate construction itself. In addition, for this it is desirable to have special knowledge and skills.

First you need to remove the back cover of the phone. In a situation where such an opportunity is not provided, you need to touch two seams with any plastic object and also eliminate the surface.
After that, it is important to remove foreign parts that interfere with contact with the microphone.
Next, it is worth arming with a cotton swab and dipping it in an alcohol solution.
Now with its help you can thoroughly clean all the built-in elements and wipe the components.

ATTENTION! Do not forget to wait for the complete evaporation of previously applicable alcohol.

In the end, you just need to assemble the structure back and check the unit for functionality.

As for the elimination of moisture, this is a completely different variation of actions. However, it will also have to disassemble a certain part of the entire phone, as was already described above in the article. It is worth understanding the differences: next, contact verification is necessary. If they are not oxidized, you can leave the structure immediately in front of any included incandescent lamp so that it evaporates all the available moisture. It is also possible to use a heating device. After several minutes, you will need to assemble the unit in reverse order.

Useful information

The most popular and easiest way is to use a low-power vacuum cleaner, which is specially designed to eliminate various kinds of pollution of small structures. At the same time, the unit has a removable nozzle, which greatly simplifies operation. Thus, the design should be presented directly to the microphone opening and wait for complete cleaning.