For a variety and dilution of the interior, the design of unusual models is most often used in a room. A berth takes special attention in the room, therefore, in its manufacture should take into account many significant points. This article has been written to help you sort through this case.
What to make a crib-house
To create a truly practical structure, you need to choose the right source. Their appearance will directly depend on the given shape. And the quantity is affected by the dimensions of the product. So, for the frame you will need bars, the parameters of which should be approximately 5 by 5 centimeters.
If you plan to save on production, it is better to use a tent style. In such a model, the upper surface is represented as a fabric. It can be both organza and chiffon. If you rely on the most common cases, then in the form of walls and roofs, boards or plywood sheets are used. And it is best that the second of these is made of wood, and its thickness was 0.6 centimeters. But for those who do not have wood products, it is permissible to use drywall instead. In principle, there is no difficulty in interacting with it, since it lends itself perfectly to cutting, except during installation.
Necessary tools
To create a structure, you should purchase the following list:
- hacksaw;
- screwdriver;
- electric jigsaw;
- sandpaper;
- construction glue;
- bolts and screws;
- pencil;
- drill with parameters of 6 by 11 millimeters.
Component beds
All items will be made of the following materials.
- Wooden bars in the amount of four pieces. As for the parameters, this is 40 * 70 * 1200 millimeters - width, length, height, respectively.
- And two bars 40 * 70 * 1660 cm.
- Mattress 165 * 80 centimeters.
DIY crib drawing
The whole scheme is based on the dimensions that you want to see in the future. If you have a small room, then it is advisable to make smaller sizes. You just need to make a sketch so that there is something to rely on and not get confused with the process itself. In principle, focusing solely on instructions, you can create at least a high-quality device.
How to assemble a crib: a step-by-step guide
For a complete understanding, each individual step will be detailed.
Base assembly
As usual, it all starts with the construction of the foundation, on which the entire structure will be mounted. And the initial step will be the manufacture of the main part from the bars (length = 1200 mm). After they are installed, each of them should saw off the upper part with a jigsaw, it is advisable to do this at an angle of 45 degrees. To accomplish this as accurately as possible, you can draw markings, additionally using the construction level.
Assembly of side structures
From the bottom you need to screw a block with 820 mm. The distance from the transverse to the floor should be equal to 150 mm. Do not forget about the screed, which can usually be purchased at the store. Pre-drilled holes in the lower part, and its depth = 130 millimeters. In the lateral side, it is also worth making a recess, it should be in the middle of the bar and fall into the recess. A screw should be screwed into the formed opening, and then an eccentric (the whole device will be fixed on it).
Roof assembly
At this stage, you must already use the bars, the lengths of which are 730 millimeters. You need to use all 4 pieces. At this point, you should remember how you sawed off at an angle the ends of the products for the base. The same manipulations should be performed in a similar way. Next come in handy sandpaper. With its help, it is recommended to process the formed segments so that in the future your child will not be able to receive damage from them. As a result, the support of the entire structure should be formed. And the upper part, in turn, is attached thanks to glue to the general structure. Moreover, it is desirable to glue several times, thereby reliability will be guaranteed. Next, the entire top must be put on the screws at a distance of 4 mm from the border of the two roofs.
Dressing crib-house
Of course, the entire decor and choice of shade will directly depend on the gender of the child. The most popular color methods are considered to be the use of a garland or balls. In addition, it can be fixed on the top of the mobile. They can be in the form of various animals or clouds. Canopy is also widely used. Just need to choose the right color for the interior and attach it. As for universal shades, it is beige or white, they perfectly fit the most different images of rooms.
Leave Your Comment